Glanzmax Buffing Compounds
Glanzmax is an all-new professional solid bar buffing compound by Jescar. We've used our over four decades of polishing experience to develop a unique and high quality line of solid compounds used by professionals and high end technicians alike.
To achieve a high gloss finish it is first necessary to sand the surface so it is perfectly flat with all of the imperfections and orange peel removed. Depending on the type of coating, start with a medium grit sandpaper, then continue with progressively finer grits ultimately finishing with 600-1000 grit before beginning the buffing process. Keep in mind that the purpose of buffing is to remove sanding scratches and not to level the surface.
We offer a wide variety of solid bar buffing compounds that range from coarse to extremely fine, and with different properties from dry to greasy for the appropriate level of lubrication and heat reduction. In addition, our compounds are designed specifically for the material being buffed which will result in better finish quality and greater efficiency. Compounds for buffing metal will never perform as well on wood coatings as our compounds formulated for lacquer, polyurethane and polyester coating.
Our general recommendation for buffing guitar finishes is to sand the topcoat to a minimum of 1000 grit. Using a 60/60 cotton buff apply Glanzmax 60 compound to the wheel and proceed to remove the sanding marks. After the first pass in one direction, buff 90 degrees against the buff lines to smooth out the surface completely eliminating the sanding marks. Then with a bleached Domet flannel buff apply Glanzmax 30 compound to the wheel and bring the surface to an excellent high gloss finish. For an even higher level of extreme gloss substitute the Glanzmax 30 for our Glanxmax 15 compound. After completing the buffing process clean the surface with Jescar Paint Refresh Guitar Polish spray and a microfiber polishing cloth.
Products Available On Jescar.com:
Glanzmax 90 – Heavy cut pre-polish for metals and plastic. Removes 220 grit sanding scratches.
Glanzmax 80 – Brown Tripoli pre-polish compound for removing 400 grit sanding. Use with brass and wood coatings.
Glanzmax 60 – Medium compound for removing 600-800 grit on wood coatings and plastic.
Glanzmax 50 – Fine coloring compound for aluminum.
Glanzmax 40 – Fine, dry compound for steel and wood coatings.
Glanzmax 30 – Fine compound for removing 800-1000 grit on wood coatings and plastic for high gloss finishes.
Glanzmax 15 – Ultra fine, dry compound for wood coating and metals.