For Best Results, Follow This Step-by-Step Guide

Surface Preparation

Begin with a thorough wash using a pH-neutral car shampoo. Rinseless wash methods are also suitable.

Decontaminate the Paint

Use a clay bar or clay towel to remove bonded contaminants and ensure a smooth, clean surface.

Dry the Surface

Make sure the paint is completely dry before moving on to the sealant application.

Ideal Application Conditions

Recommended Temperature

Apply above 50°F.

Avoid Direct Sunlight and Hot Panels

Ensure the surface is cool to the touch before application. Applying to hot panels or in direct sunlight can cause the sealant to cure too quickly, making removal difficult. Early morning or late afternoon are ideal times for outdoor application.

Application Instructions

Hand Application

Using a foam or microfiber applicator pad, apply a pea-sized drop of Power Lock Plus. Work in a crosshatch pattern to ensure full coverage.

Machine Application

Using a Blue Jescar Finishing Foam Pad, apply 3–4 pea-sized drops of Power Lock Plus. Work in a crosshatch pattern on speed setting 3–4 to ensure full coverage.

Let It Cure

Allow the sealant to set for 15–30 minutes depending on temperature and humidity. Cooler or more humid conditions may require the full 30 minutes.

Buff Off Residue

Use a clean, dry microfiber towel to wipe off the cured sealant. Flip the towel as needed to avoid streaking.

Avoid Water Exposure

Do not wash or expose the vehicle to rain for at least 12 hours after application to allow proper curing.

Optional Second Coat

For added protection and gloss, a second layer can be applied after 4–6 hours.

Maintenance Tip

For washing, we recommend using a pH-neutral shampoo such as the Jescar Auto Wash Shampoo. After the wash, for ongoing shine and protection, maintain with Jescar Ceramic Spray Wax.
Suggested Link: Link both product names to their product pages.